Iso 15765 2 2016

ISO 11898-2:2016 specifies the high-speed (transmission rates of up to 1 Mbit/s) medium access unit (MAU), and some medium dependent interface (MDI) features (according to ISO 8802-3), which comprise the physical layer of the controller area network. ISO 11898-2 uses a two-wire balanced signalling scheme. ISO 15765-2:2016(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical. Buy iso 15765-2: 2016 road vehicles - diagnostic communication over controller area network (docan) - part 2: transport protocol and network layer services from sai global.

  1. Iso 15765 Can
  2. Iso 15765 2 2016 Teljes Film
  3. Iso 15765 2 2016 Pdf Download

Here are recent publications from the British Standards Institution (BSI), together with announcements of supersession and withdrawal. Hard copy and PDF formats of BSI standards are available for purchase from our website www.standards.govt.nz by entering the standard number.

British standards

The publications listed below are new and revised British standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the ’British standards withdrawn’ section.

  • BS 5427:2016 Code of practice for the use of profiled sheet for roof and wall cladding on buildings
    Supersedes BS 5427-1:1996
  • BS 5467:2016 Electric cables. Thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1 900/3 300 V for fixed installations. Specification
    Supersedes BS 5467:1997+A3:2008 which remains current
  • BS 5489-2:2016 Code of practice for the design of road lighting. Lighting of tunnels
    Supersedes BS 5489-2:2003+A1:2008
  • BS 6724:2016 Electric cables. Thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1 900/3 300 V for fixed installations, having low emission of smoke and corrosive gases when affected by fire. Specification
    Supersedes BS 6724:1997+A3:2008 which remains current
  • BS 7984-1:2016 Keyholding and response services. General recommendations for keyholding and response services
    Supersedes BS 7984:2008
  • BS 8546:2016 Travel adaptors compatible with UK plug and socket system. Specification
  • BS 8611:2016 Robots and robotic devices. Guide to the ethical design and application of robots and robotic systems
Iso

BS EN standards

The following are British standard implementations of the English language versions of European standards (ENs). The date referenced in the identifier is the date of the European standard.

  • BS EN 196-1:2016 Methods of testing cement. Determination of strength
    Supersedes BS EN 196-1:2005
  • BS EN 878:2016 Chemicals used for treatment of water intended for human consumption. Aluminium sulfate
    Supersedes BS EN 878:2004
  • BS EN 882:2016 Chemicals used for treatment of water intended for human consumption. Sodium aluminate
    Supersedes BS EN 882:2004
  • BS EN 887:2016 Chemicals used for treatment of water intended for human consumption. Aluminium iron sulfate
    Supersedes BS EN 887:2004
  • BS EN ISO 2178:2016 Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method
    Supersedes BS EN ISO 2178:1995
  • BS EN ISO 2179:2016 Electroplated coatings of tin-nickel alloy. Specification and test methods
  • BS EN ISO 3950:2016 Dentistry. Designation system for teeth areas of the oral cavity
    Supersedes BS EN ISO 3950:2009
  • BS EN ISO 4254-14:2016 Agricultural machinery. Safety. Bale wrappers
  • BS EN 4531-201:2016 Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Optical contact for EN 4641 singlemode cable -55°C to 25°Product standard
  • BS EN ISO 4624:2016 Paints and varnishes. Pull-off test for adhesion
    Supersedes BS EN ISO 4624:2003
  • BS EN 4644-003:2016 Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175°C (or 125°C) continuous. Rectangular inserts. Product standard
    Supersedes BS EN 4644-003:2011
  • BS EN 4644-133:2016 Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175°C (or 125°C) continuous. Size 3 receptacle for rack and panel application, class C and D. Product Standard
    Supersedes BS EN 4644-133:2011
  • BS EN 4644-141:2016 Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175°C (or 125°C) continuous. Size 4 plug for rack and panel applications, class C and D. Product standard
    Supersedes BS EN 4644-141:2011
  • BS EN 4697:2016 Aerospace series. General and installation requirements for passenger seat fittings
    Supersedes BS EN 4697:2012
  • BS EN 6049-009:2016 Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Selfwrapping fire protection sleeve, flexible, post installation, operating temperature from -55°C to 260°C. Product standard
  • BS EN ISO 7784-1:2016 Paints and varnishes. Determination of resistance to abrasion. Method with abrasive paper covered wheels and rotating test specimen
    Supersedes BS EN ISO 7784-1:2006
  • BS EN ISO 7784-2:2016 Paints and varnishes. Determination of resistance to abrasion. Method with abrasive rubber wheels and rotating test specimen
    Supersedes BS EN ISO 7784-2:2006
  • BS EN ISO 7784-3:2016 Paints and varnishes. Determination of resistance to abrasion. Method with abrasive paper covered wheel and linearly reciprocating test specimen
    Supersedes BS EN ISO 7784-3:2006
  • BS EN ISO 8537:2016 Sterile single-use syringes, with or without needle, for insulin
    Supersedes BS EN ISO 8537:2008
  • BS EN ISO 8968-4:2016 Milk and milk products. Determination of nitrogen content. Determination of protein and non-protein nitrogen content and true protein content calculation (Reference method)
    Supersedes BS EN ISO 8968-4:2002
  • BS EN ISO 9936:2016 Animal and vegetable fats and oils. Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography
    Supersedes BS EN ISO 9936:2006+A1:2011
  • BS EN 10305-1:2016 Steel tubes for precision applications. Technical delivery conditions. Seamless cold drawn tubes
    Supersedes BS EN 10305-1:2010
  • BS EN 10305-2:2016 Steel tubes for precision applications. Technical delivery conditions. Welded cold drawn tubes
    Supersedes BS EN 10305-2:2010
  • BS EN ISO 10309:2016 Metallic coatings. Porosity tests. Ferroxyl test
  • BS EN ISO 10360-10:2016 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS). Laser trackers for measuring point-to-point distances
  • BS EN ISO 11145:2016 Optics and photonics. Lasers and laser-related equipment. Vocabulary and symbols
    Supersedes BS EN ISO 11145:2008
  • BS EN ISO 12707:2016 Non-destructive testing. Magnetic particle testing. Vocabulary
    Supersedes BS EN 1330-7:2005
  • BS EN 12760:2016 Industrial valves. Socket welding ends for steel valves
    Supersedes BS EN 12760:1999
  • BS EN 13107:2015 Safety requirements for cableway installations designed to carry persons. Civil engineering works
    Supersedes BS EN 13107:2004
  • BS EN 13121-3:2016 GRP tanks and vessels for use above ground. Design and workmanship
    Supersedes BS 4994:1987 and BS EN 13121-3:2008+A1:2010
  • BS EN ISO 13299:2016 Sensory analysis. Methodology. General guidance for establishing a sensory profile
    Supersedes BS EN ISO 13299:2010
  • BS EN 13719:2016 Geosynthetics. Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers
    Supersedes BS EN 13719:2002
  • BS EN 13869:2016 Lighters. Child safety requirements for lighters. Safety requirements and test methods
    Supersedes BS EN 13869:2002+A1:2011
  • BS EN ISO 14021:2016 Environmental labels and declarations. Self declared environmental claims (Type II environmental labelling)
    Supersedes BS EN ISO 14021:2001+A1:2011
  • BS EN ISO 15225:2016 Medical devices. Quality management. Medical device nomenclature data structure
    Supersedes BS EN ISO 15225:2010
  • BS EN ISO 15614-8:2016 Specification and qualification of welding procedures for metallic materials. Welding procedure test. Welding of tubes to tube-plate joints
    Supersedes BS EN ISO 15614-8:2002
  • BS EN ISO 15753:2016 Animal and vegetable fats and oils. Determination of polycyclic aromatic hydrocarbons
    Supersedes BS EN ISO 15753:2006+A1:2011
  • BS EN ISO 16315:2016 Small craft. Electric propulsion system
  • BS EN 16724:2016 Thermal insulation products for building applications. Instructions for mounting and fixing for determination of the reaction to fire testing of external thermal insulation composite systems (ETICS)
  • BS EN 16751:2016 Bio-based products. Sustainability criteria
  • BS EN 16767:2016 Industrial valves. Steel and cast iron check valves
    Supersedes BS EN 12334:2001 and BS EN 14341:2006
  • BS EN ISO 16773-1:2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens. Terms and definitions
    Supersedes BS EN ISO 16773-1:2007
  • BS EN ISO 16773-2:2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens. Collection of data
    Supersedes BS EN ISO 16773-2:2007
  • BS EN ISO 16773-3:2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens. Processing and analysis of data from dummy cells
    Supersedes BS EN ISO 16773-3:2009
  • BS EN 16778:2016 Protective gloves. The determination of Dimethylformamide in gloves
  • BS EN ISO 17751-1:2016 Textiles. Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends. Light Microscopy method
  • BS EN ISO 17751-2:2016 Textiles. Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends. Scanning Electron Microscopy method
  • BS EN ISO 17827-1:2016 Solid biofuels. Determination of particle size distribution for uncompressed fuels. Oscillating screen method using sieves with apertures of 3,15 mm and above
    Supersedes BS EN 15149-1:2010
  • BS EN ISO 17830:2016 Solid biofuels. Particle size distribution of disintegrated pellets
    Supersedes BS EN 16126:2012
  • BS EN ISO 17916:2016 Safety of thermal cutting machines
  • BS EN ISO 17943:2016 Water quality. Determination of volatile organic compounds in water. Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS)
  • BS EN ISO 18254-1:2016 Textiles. Method for the detection and determination of alkylphenol ethoxylates (APEO). Method using HPLC-MS
  • BS EN ISO 18452:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of thickness of ceramic films by contact-probe profilometer
    Supersedes BS EN 1071-1:2003
  • BS EN ISO 18556:2016 Dentistry. Intraoral spatulas
  • BS EN ISO 18635:2016 Water quality. Determination of short-chain polychlorinated alkanes (SCCPs) in sediment, sewage sludge and suspended (particulate) matter. Method using gas chromatography mass spectrometry (GC-MS) and electron capture negative ionization (ECNI)
  • BS EN ISO 18739:2016 Dentistry. Vocabulary of process chain for CAD/CAM systems
  • BS EN ISO 18744:2016 Microbiology of the food chain. Detection and enumeration of Cryptosporidium and Giardia in fresh leafy green vegetables and berry fruits
  • BS EN ISO 19070:2016 Leather. Chemical determination of N-methyl-2- pyrrolidone (NMP) in leather
  • BS EN ISO 19071:2016 Leather. Chemical tests. Determination of chromium (VI) and the reductive potential for chromium tanning agents
  • BS EN ISO 21549-5:2016 Health informatics. Patient healthcard data. Identification data
    Supersedes BS EN ISO 21549-5:2008
  • BS EN ISO 22854:2016 (BS 2000-566:2016) Liquid petroleum products. Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel. Multidimensional gas chromatography method
    Supersedes BS EN ISO 22854:2014
  • BS EN ISO 24490:2016 Cryogenic vessels. Pumps for cryogenic service
    Supersedes BS EN 13275:2000
  • BS EN ISO 24534-3:2016 Intelligent transport systems. Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Vehicle data
    Supersedes BS EN ISO 24534-3:2010
  • BS EN ISO 25178-1:2016 Geometrical product specifications (GPS). Surface texture: Areal. Indication of surface texture
  • BS EN 60335-2-3:2016 Household and similar electrical appliances. Safety. Particular requirements for electric irons
    Supersedes BS EN 60335-2-3:2002+A11:2010 which remains current
  • BS EN 60384-14-1:2016 Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed capacitors for electromagnetic interference suppression and connection to the supply mains. Assessment level DZ
    Supersedes BS EN 60384-14-1:2005 and BS EN 60384-14-3:2004
  • BS EN 60393-2:2016 Potentiometers for use in electronic equipment. Sectional specification. Lead-screw actuated and rotary preset potentiometers
    Supersedes BS QC 410100:1990
  • BS EN 60393-5:2016 Potentiometers for use in electronic equipment. Sectional specification. Single-turn rotary low power wirewound and non-wirewound potentiometers
    Supersedes BS QC 410300:1992
  • BS EN 60393-6:2016 Potentiometers for use in electronic equipment. Sectional specification. Surface mount preset potentiometers
  • BS EN 60534-2-3:2016 Industrial-process control valves. Flow capacity. Test procedures
    Supersedes BS EN 60534-2-3:1998
  • BS EN 60603-7-81:2016 Connectors for electronic equipment. Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz
  • BS EN 60728-5:2016 Cable networks for television signals, sound signals and interactive services. Headend equipment
    Supersedes BS EN 60728-5:2008
  • BS EN 61189-3-719:2016 Test methods for electrical materials, printed boards and other interconnection structures and assemblies. Test methods for interconnection structures (printed boards). Monitoring of single plated-through hole (PTH) resistance change during temperature cycling
  • BS EN 61377:2016 Railway applications. Rolling stock. Combined test method for traction systems
    Supersedes BS EN 61377-1:2006, BS EN 61377-2:2002 and BS EN 61377-3:2002
  • BS EN 61400-13:2016 Wind turbines. Measurement of mechanical loads
    Supersedes DD IEC/TS 61400-13:2001
  • BS EN 61427-2:2015 Secondary cells and batteries for renewable energy storage. General requirements and methods of test. On-grid applications
    Supersedes BS EN 61427:2005
  • BS EN 61753-381-2:2016 Fibre optic interconnecting devices and passive components. Performance standard. Cyclic arrayed waveguide grating. Category C (controlled environment)
  • BS EN 61788-4:2016 Superconductivity. Residual resistance ratio measurement. Residual resistance ratio of Nb-and Nb3Sn composite superconductors
    Supersedes BS EN 61788-4:2011
  • BS EN 62047-1:2016 Semiconductor devices. Micro-electromechanical devices. Terms and definitions
    Supersedes BS EN 62047-1:2006
  • BS EN 62087-1:2016 Audio, video, and related equipment. Determination of power consumption. General
    Supersedes BS EN 62087:2012 which remains current
  • BS EN 62087-3:2016 Audio, video, and related equipment. Determination of power consumption. Television sets
    Supersedes BS EN 62087:2012 which remains current
  • BS EN 62087-4:2016 Audio, video and related equipment. Determination of power consumption. Video recording equipment
    Supersedes BS EN 62087:2012 which remains current
  • BS EN 62087-5:2016 Audio, video and related equipment. Determination of power consumption. Set top boxes (STB)
    Supersedes BS EN 62087:2012 which remains current
  • BS EN 62264-4:2016 Enterprise-control system integration. Object model attributes for manufacturing operations management integration
  • BS EN 62446-1:2016 Photovoltaic (PV) systems. Requirements for testing, documentation and maintenance. Grid connected systems. Documentation, commissioning tests and inspection
    Supersedes BS EN 62446:2009
  • BS EN 62601:2016 Industrial networks. Wireless communication network and communication profiles. WIA-PA
    Supersedes BS IEC 62601:2011
  • BS EN 62841-3-10:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for transportable cut-off machines
    Supersedes BS EN 61029-2-10:2010+A11:2013 which remains current
  • BS EN ISO 80079-36:2016 Explosive atmospheres. Non-electrical equipment for explosive atmospheres. Basic method and requirements
    Supersedes BS EN 13463-1:2009
  • BS EN ISO 80079-37:2016 Explosive atmospheres. Non-electrical equipment for explosive atmospheres. Non electrical type of protection constructional safety “c”, control of ignition source “b”, liquid immersion “k”
    Supersedes BS EN 13463-5:2011, BS EN 13463-6:2005 and BS EN 13463-8:2003
  • BS EN ISO 80369-6:2016 Small bore connectors for liquids and gases in healthcare applications. Connectors for neuraxial applications

BS ENs implemented by amendment

  • BS EN ISO 18589-7:2016 Measurement of radioactivity in the environment. Soil. In situ measurement of gamma-emitting radionuclides
    Implementation of European Standard EN ISO 18589-7 by amendment to BS ISO 18589-7:2013
  • BS EN 61227:2016 Nuclear power plants. Control rooms. Operator controls
    Implementation of European Standard of EN 61227 by amendment to BS IEC 61227:2008
  • PD CEN ISO/TS 14071:2016 Environmental management. Life cycle assessment. Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006
    Implementation of European Technical Specification CEN ISO/TS 14071 by amendment to PD ISO/TS 14071:2014

BS implementations

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 1413:2016 Horology. Shock-resistant wrist watches
  • BS ISO 2782-1:2016 Rubber, vulcanized or thermoplastic. Determination of permeability to gases. Differential-pressure methods
    Supersedes BS ISO 2782-1:2012
  • BS ISO 7121:2016 Steel ball valves for general-purpose industrial applications
    Supersedes BS ISO 7121:2006
  • BS ISO 8254-3:2016 Paper and board. Measurement of specular gloss. 20° gloss with a converging beam, method
    Supersedes BS ISO 8254-3:2004
  • BS ISO 8812:2016 Earth-moving machinery. Backhoe loaders. Terminology and commercial specifications
  • BS ISO 10571:2016 Tyres for mobile cranes and similar specialized machines
    Supersedes BS ISO 10571:2011
  • BS ISO 10924-1:2016 Road vehicles. Circuit breakers. Definitions general test requirements
    Supersedes BS ISO 10924-1:2009
  • BS ISO 10924-5:2016 Road vehicles. Circuit breakers. Circuit breakers with bolt with rated voltage of 450 V
  • BS ISO 11525-4:2016 Rough-terrain trucks. User requirements. Additional requirements for variable-reach trucks handling freely suspended loads
  • BS ISO 11665-11:2016 Measurement of radioactivity in the environment. Air: radon-222. Test method soil gas with sampling at depth
  • BS ISO 12117-2:2008+A1:2016 Earth-moving machinery. Laboratory tests and performance requirements for protective structures of excavators. Roll-over protective structures (ROPS) for excavators of over 6 t
  • BS ISO 13674-2:2016 Road vehicles. Test method for the quantification of on-centre handling. Transition test
    Supersedes BS ISO 13674-2:2006
  • BS ISO 14513:2016 Road vehicles. Pedestrian protection. Head impact test method
    Supersedes BS ISO 14513:2006
  • BS ISO 15031-3:2016 Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. Diagnostic connector and related electrical circuits: Specification and use
  • BS ISO 15364:2016 Ships and marine technology. Pressure/vacuum valves for cargo tanks
    Supersedes BS ISO 15364:2007
  • BS ISO 15500-2:2016 Road vehicles. Compressed natural gas (CNG) fuel system components. Performance and general test methods
    Supersedes BS ISO 15500-2:2012
  • BS ISO 15765-2:2016 Road vehicles. Diagnostic communication over Controller Area Network (DoCAN). Transport protocol and network layer services
    Supersedes BS ISO 15765-2:2011
  • BS ISO 15765-4:2016 Road vehicles. Diagnostic communication over Controller Area Network (DoCAN). Requirements for emissions-related systems
    Supersedes BS ISO 15765-4:2011+A1:2013
  • BS ISO 15901-1:2016 Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption. Mercury porosimetry
    Supersedes BS ISO 15901-1:2005
  • BS ISO 16132:2016 Ductile iron pipes and fittings. Seal coats for cement mortar linings
    Supersedes BS ISO 16132:2004
  • BS ISO 17183:2016 Soil quality. Screening soils for isopropanol-extractable organic compounds by determining emulsification index by light attenuation
  • BS ISO 17520:2016 Space environment (natural and artificial). Cosmic ray and solar energetic particle penetration inward the magnetosphere. Method of determination of the effective vertical cut-off rigidity
  • BS ISO 17741:2016 General technical rules for measurement, calculation and verification of energy savings of projects
  • BS ISO 18163:2016 Clothing. Digital fittings. Vocabulary and terminology used for the virtual garment
  • BS ISO 18187:2016 Soil quality. Contact test for solid samples using the dehydrogenase activity of Arthrobacterglobiformis
  • BS ISO 18421:2016 Ships and marine technology. Inland navigation vessels. Lifebuoy housings
    Supersedes BS ISO 18421:2013
  • BS ISO 18644:2016 Fertilizers and soil conditioners. Controlled release fertilizer. General requirements
  • BS ISO 18831:2016 Clothing. Digital fittings. Attributes of virtual garments
  • BS ISO/IEC/IEEE 18881:2016 Information technology. Ubiquitous green community control network. Control and management
  • BS ISO/IEC/IEEE 18883:2016 Information technology. Ubiquitous green community control network. Security
  • BS ISO 18886:2016 Refractory test-piece preparation. Gunning refractory panels by wet gunning techniques
  • BS ISO/IEC 19770-3:2016 Information technology. IT asset management. Entitlement schema
  • BS ISO/IEC 24779-1:2016 Information technology. Cross-jurisdictional and societal aspects of implementation of biometric technologies. Pictograms, icons and symbols for use with biometric systems. General principles
  • BS ISO/IEC 29169:2016 Information technology. Process assessment. Application of conformity assessment methodology to the assessment to process quality characteristics and organizational maturity
  • BS ISO/IEC 29177:2016 Information technology. Automatic identification and data capture technique. Identifier resolution protocol for multimedia information access triggered by tag-based identification
  • BS ISO 29481-1:2016 Building information models. Information delivery manual. Methodology and format
    Supersedes BS ISO 29481-1:2010
  • BS ISO 29821-2:2016 Condition monitoring and diagnostics of machines. Ultrasound. Procedures and validation
  • BS ISO/IEC 30100-3:2016 Information technology. Home network resource management. Management application
  • BS ISO/IEC 30134-2:2016 Information technology. Data centres. Key performance indicators. Power usage effectiveness (PUE)
  • BS ISO/IEC 30134-3:2016 Information technology. Data centres. Key performance indicators. Renewable energy factor (REF)
  • BS IEC 60747-6:2016 Semiconductor devices. Discrete devices. Thyristors
    Supersedes BS IEC 60747-6:2000
  • BS IEC 61156-9:2016 Multicore and symmetrical pair/quad cables for digital communications. Cables for channels with transmission characteristics up to 2 GHz. Sectional specification
  • BS IEC 61156-10:2016 Multicore and symmetrical pair/quad cables for digital communications. Cables for cords with transmission characteristics up to 2 GHz. Sectional specification
  • BS IEC 61671-2:2016 Standard for automatic test markup language (ATML) instrument description
  • BS IEC 61671-4:2016 Standard for automatic test markup language (ATML) test configuration
  • BS IEC 61671-5:2016 Standard for automatic test markup language (ATML) test adapter description
  • BS IEC 61671-6:2016 Standard for automatic test markup language (ATML) test station description

Published documents

  • PD CEN/TS 15472:2016 Postal services. Method for measurement of parcel transit time for cross-border parcels within the European Union and EFTA using Tracking and Tracing
    Supersedes PD CEN/TR 15472:2006
  • PD CEN/TS 15634-3:2016 Foodstuffs. Detection of food allergens by molecular biological methods. Hazelnut (Corylus avellana). Qualitative detection of a specific DNA sequence in chocolate by real-time PCR
  • PD CEN/TS 15634-4:2016 Foodstuffs. Detection of food allergens by molecular biological methods. Peanut (Arachis hypogaea). Qualitative detection of a specific DNA sequence in chocolate by real-time PCR
  • PD CEN/TR 16879:2016 Siting of Playground and other recreational facilities. Advice on methods for positioning and separation
  • PD CEN/TS 16919:2016 Postal services. Interface and data transfer format for capturing postal automation events IDT-PAE
  • PD CEN/TS 16920:2016 Environmental influence testing methodology for operational deployments of European ABC systems
  • PD CEN/TS 16921:2016 Personal identification. Borders and law enforcement application profiles for mobile biometric identification systems
  • PD ISO/TS 16973:2016 Respiratory protective devices. Classification for respiratory protective device (RPD), excluding RPD for underwater application
  • PD ISO/PAS 19295:2016 Electrically propelled road vehicles. Specification of voltage sub-classes for voltage class B
  • PD ISO/TS 19337:2016 Nanotechnologies. Characteristics of working suspensions of nano-objects for in vitro assays to evaluate inherent nano-object toxicity
  • PD ISO/TS 19567-1:2016 Photography. Digital cameras. Texture reproduction measurements. Frequency characteristics measurements using cyclic pattern
  • PD ISO/TS 21219-9:2016 Intelligent transport systems. Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2). Service and network information (TPEG2-SNI)
  • PD ISO/TR 21414:2016 Hydrometry. Groundwater. Surface geophysical surveys for hydrogeological purposes
  • PD ISO/TS 22002-6:2016 Prerequisite programmes on food safety. Feed and animal food production
  • PD IEC/TR 60493-2:2010 Guide for the statistical analysis of ageing test data. Validation of procedures for statistical analysis of censored normally distributed data
  • PD IEC/TR 61282-9:2016 Fibre optic communication system design guides. Guidance on polarization mode dispersion measurements and theory
    Supersedes PD IEC/TR 61282-9:2006
  • PD CLC/TS 61643-22:2016 Low-voltage surge protective devices. Surge protective devices connected to telecommunications and signalling networks. Selection and application principles
    Supersedes DD CLC/TS 61643-22:2006
  • PD IEC/TR 61850-90-8:2016 Communication networks and systems for power utility automation. Object model for Emobility
  • PD IEC/TR 61948-1:2016 Nuclear medicine instrumentation. Routine tests. Gamma radiation counting system
    Supersedes PD IEC/TR 61948-1:2001
  • PD IEC/TR 62351-12:2016 Power systems management and associated information exchange. Data and communications security. Resilience and security recommendations for power systems with distributed energy resources (DER) cyber-physical systems
  • PD IEC/TS 62668-1:2016 Process management for avionics. Counterfeit prevention. Avoiding the use of counterfeit, fraudulent and recycled electronic components
    Supersedes PD IEC/TS 62668-1:2014
  • PD IEC/TR 62901:2016 Guidance for the selection of drop cables

Publicly Available Specifications

Publicly Available Specifications are issued to provide an interim document where there is a market need but where a full standard has yet to be published.

  • PAS 8810:2016 Tunnel design. Design of concrete segmental tunnel linings. Code of practice
  • PAS 8820:2016 Construction materials. Alkali-activated cementitious material and concrete. Specification

Corrigenda to British standards and updated British standards

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended standards and corrigenda to British standards were made available last month.

  • BS EN 203-1:2014 Gas heated catering equipment. General safety rules
    CORRIGENDUM 1
  • BS EN 1092-3:2003 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Copper alloy flanges
    CORRIGENDUM 2
  • BS EN 1809:2014+A1:2016 Diving equipment. Buoyancy compensators. Functional and safety requirements, test methods
    AMENDMENT 1
  • BS EN 4165-002:2015 Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Specification of performance and contact arrangements
    CORRIGENDUM 1
  • BS EN ISO 8611-2:2012+A1:2016 Pallets for materials handling. Flat pallets. Performance requirements and selection of tests
    AMENDMENT 1
  • BS EN 13480-1:2012 Metallic industrial piping. General
    CORRIGENDUM 1
  • BS EN 13724:2013 Postal services. Apertures of private letter boxes and letter plates. Requirements and test methods
    CORRIGENDUM 1
  • BS EN 16254:2013+A1:2016 Adhesives. Emulsion polymerized isocyanate (EPI) for load-bearing timber structures. Classification and performance requirements
    AMENDMENT 1
  • BS EN 16330:2013 Winter and road service area equipment. Power system and related controls. Power hydraulic system and electric interfaces
    CORRIGENDUM 1
  • BS EN ISO 18589-7:2016 Measurement of radioactivity in the environment. Soil. In situ measurement of gamma-emitting radionuclides
    CORRIGENDUM 1
  • BS EN 50545-1:2011+A1:2016 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels. General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
    AMENDMENT 1
  • BS EN 50553:2012+A1:2016 Railway applications. Requirements for running capability in case of fire on board of rolling stock
    AMENDMENT 1
  • BS EN 60061-3:1993+A51:2015 Lamp caps and holders together with gauges for the control of interchangeability and safety. Gauges
    AMENDMENT 51
  • BS EN 60079-14:2014 Explosive atmospheres. Electrical installations design, selection and erection
    CORRIGENDUM 1
  • BS EN 60270:2001+A1:2016 High-voltage test techniques. Partial discharge measurements
    AMENDMENT 1
  • BS EN 60335-2-8:2015+A1:2016 Household and similar electrical appliances. Safety. Particular requirements for shavers, hair clippers and similar appliances
    AMENDMENT 1
  • BS EN 60335-2-11:2010+A1:2015 Household and similar electrical appliances. Safety. Particular requirements for tumble dryers
    CORRIGENDUM 1
  • BS EN 60335-2-25:2012+A2:2016 Household and similar electrical appliances. Safety. Particular requirements for microwave ovens, including combination microwave ovens
    AMENDMENT 2
  • BS EN 60335-2-35:2016 Household and similar electrical appliances. Safety. Particular requirements for instantaneous water heaters
    CORRIGENDUM 1
  • BS EN 60335-2-37:2002+A12:2016 Household and similar electrical appliances. Safety. Particular requirements for commercial electric deep fat fryers
    AMENDMENT 12
  • BS EN 60745-2-3:2011+A13:2015 Hand-held motor-operated electric tools. Safety. Particular requirements for grinders, polishers and disk-type sanders
    CORRIGENDUM 1
  • BS EN 60793-1-20:2014 Optical fibres. Measurement methods and test procedures. Fibre geometry
    CORRIGENDUM 1
  • BS EN 60870-5-101:2003+A1:2016 Telecontrol equipment and systems. Transmission protocols. Companion standard for basic telecontrol tasks
    AMENDMENT 1
  • BS EN 60929:2011+A1:2016 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps. Performance requirements
    AMENDMENT 1
  • BS EN 60939-3:2015 Passive filter units for electromagnetic interference suppression. Passive filter units for which safety tests are appropriate
    CORRIGENDUM 1
  • BS EN 61009-1:2012+A12:2016 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs). General rules
    AMENDMENT 12
  • BS EN 61076-4-116:2012+A1:2016 Connectors for electronic equipment. Product requirements. Printed board connectors. Detail specification for a high-speed two-part connector with integrated shielding function
    AMENDMENT 1
  • BS EN 61227:2016 Nuclear power plants. Control rooms. Operator controls
    CORRIGENDUM 1
  • BS EN 62087-6:2015 Audio, video and related equipment. Determination of power consumption. Audio equipment
    CORRIGENDUM 1
  • BS EN 62459:2011 Sound system equipment. Electroacoustic transducers. Measurement of suspension parts
    CORRIGENDUM 1
  • BS ISO 1219-1:2012+A1:2016 Fluid power systems and components. Graphical symbols and circuit diagrams. Graphical symbols for conventional use and data-processing applications
    AMENDMENT 1
  • BS ISO 7206-4:2010+A1:2016 Implants for surgery. Partial and total hip joint prostheses. Determination of endurance properties and performance of stemmed femoral components
    AMENDMENT 1
  • BS ISO 9244:2008+A1:2016 Earth-moving machinery. Machine safety labels. General principles
    AMENDMENT 1
  • BS ISO 15500-3:2012+A1:2016 Road vehicles. Compressed natural gas (CNG) fuel system components. Check valve
    AMENDMENT 1
  • BS ISO 15500-4:2012+A1:2016 Road vehicles. Compressed natural gas (CNG) fuel system components. Manual valve
    AMENDMENT 1
  • BS ISO 15500-5:2012+A1:2016 Road vehicles. Compressed natural gas (CNG) fuel system components. Manual cylinder valve
    AMENDMENT 1
  • BS ISO 15500-6:2012+A1:2016 Road vehicles. Compressed natural gas (CNG) fuel system components. Automatic valve
    AMENDMENT 1
  • BS ISO 15500-9:2012+A1:2016 Road vehicles. Compressed natural gas (CNG) fuel system components. Pressure regulator
    AMENDMENT 1
  • BS ISO 15500-13:2012+A1:2016 Road vehicles. Compressed natural gas (CNG) fuel system components. Pressure relief device (PRD)
    AMENDMENT 1
  • BS ISO 15500-14:2012+A1:2016 Road vehicles. Compressed natural gas (CNG) fuel system components. Excess flow valve
    AMENDMENT 1
  • BS ISO 15500-16:2012+A1:2016 Road vehicles. Compressed natural gas (CNG) fuel system components. Rigid fuel line in stainless steel
    AMENDMENT 1
  • BS ISO 15500-17:2012+A1:2016 Road vehicles. Compressed natural gas (CNG) fuel system components. Flexible fuel line
    AMENDMENT 1
  • BS ISO 15500-18:2012+A1:2016 Road vehicles. Compressed natural gas (CNG) fuel system components. Filter
    AMENDMENT 1
  • BS ISO 15500-19:2012+A1:2016 Road vehicles. Compressed natural gas (CNG) fuel system components. Fittings
    AMENDMENT 1
  • BS ISO 27875:2010+A1:2016 Space systems. Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages
    AMENDMENT 1
  • PD CEN ISO/TS 14071:2016 Environmental management. Life cycle assessment. Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006
    CORRIGENDUM 1
  • PD IEC/TR 60919-3:2009+A1:2016 Performance of high-voltage direct current (HVDC) systems with line-commutated converters. Dynamic conditions
    AMENDMENT 1

British standards withdrawn

  • BS 4140-5:1986 (ISO 1232:1976) Methods of test for aluminium oxide. Determination of silica content
    This standard is withdrawn without a replacement
  • BS 4140-6:1980 (ISO 900:1977) Methods of test for aluminium oxide. Determination of titanium content
    This standard is withdrawn without a replacement
  • BS 4140-7:1986 (ISO 805:1976) Methods of test for aluminium oxide. Determination of iron content
    This standard is withdrawn without a replacement
  • BS 4140-11:1986 (ISO 1617:1976) Methods of test for aluminium oxide. Determination of sodium content
    This standard is withdrawn without a replacement
  • BS 4140-12:1986 (ISO 1618:1976) Methods of test for aluminium oxide. Determination of vanadium content
    This standard is withdrawn without a replacement
  • BS 4140-14:1997 (ISO 2070:1997) Methods of test for aluminium oxide. Determination of calcium content
    This standard is withdrawn without a replacement
  • BS 4140-16:1986 (ISO 2071:1976) Methods of test for aluminium oxide. Determination of zinc content by flame atomic absorption
    This standard is withdrawn without a replacement
  • BS 4140-22:1980 (ISO 3390:1976) Methods of test for aluminium oxide. Determination of manganese content
    This standard is withdrawn without a replacement
  • BS 4901:1976 Specification for plastics colours for building purposes
    This standard is withdrawn without a replacement
  • BS 4994:1987 Specification for design and construction of vessels and tanks in reinforced plastics
    Superseded by BS EN 13121-3:2008+A1:2010, BS EN 13121-3:2016 and BS EN 13923:2005
  • BS 5427-1:1996 Code of practice for the use of profiled sheet for roof and wall cladding on buildings. Design
    Superseded by BS 5427:2016
  • BS 7984:2008 Keyholding and response services. Code of practice
    Superseded by BS 7984-1:2016
  • BS EN 1071-1:2003 Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by contact probe filometer
    Superseded by BS EN ISO 18452:2016
  • BS EN 1330-7:2005 Non-destructive testing. Terminology. Terms used in magnetic particle testing
    Superseded by BS EN ISO 12707:2016
  • BS EN 12334:2001 Industrial valves. Cast iron check valves
    Superseded by BS EN 16767:2016
  • BS EN 13275:2000 Cryogenic vessels. Pumps for cryogenic service
    Superseded by BS EN ISO 24490:2016
  • BS EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres. Basic method and requirements
    Superseded by BS EN ISO 80079-36:2016
  • BS EN 13463-5:2011 Non-electrical equipment intended for use in potentially explosive atmospheres. Protection by constructional safety ’c’
    Superseded by BS EN ISO 80079-37:2016
  • BS EN 13463-6:2005 Non-electrical equipment for potentially explosive atmospheres. Protection by control of ignition source ’b’
    Superseded by BS EN ISO 80079-37:2016
  • BS EN 13463-8:2003 Non-electrical equipment for potentially explosive atmospheres. Protection by liquid immersion ’k’
    Superseded by BS EN ISO 80079-37:2016
  • BS EN 14341:2006 Industrial valves. Steel check valves
    Superseded by BS EN 16767:2016
  • BS EN 15149-1:2010 Solid biofuels. Determination of particle size distribution. Oscillating screen method using sieve apertures of 1 mm and above
    Superseded by BS EN ISO 17827-1:2016
  • PD CEN/TR 15472:2006 Postal services. Measurement of transit times for parcels by the use of a track and trace system
    Superseded by PD CEN/TS 15472:2016
  • BS EN ISO 16106:2006 Packaging. Transport packages for dangerous goods. Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings. Guidelines for the application of ISO 9001
    This standard is withdrawn without a replacement
  • BS EN 16126:2012 Solid biofuels. Determination of particle size distribution of disintegrated pellets
    Superseded by BS EN ISO 17830:2016
  • BS EN 50304:2009+A1:2010 (BS EN 60350:2009) Electric cooking ranges, hobs, ovens and grills for household use. Methods for measuring performance
    Superseded by BS EN 60350-2:2013 and BS EN 60350-1:2013+A11:2014
  • BS EN 55015:2006+A2:2009 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
    Superseded by BS EN 55015:2013
  • BS EN 60384-14-3:2004 Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed capacitors for electromagnetic interference suppression and connection to the supply mains. Assessment level DZ
    Superseded by BS EN 60384-14-1:2016
  • BS EN 60598-2-8:1997+A2:2008 Luminaires. Particular requirements. Handlamps
    Superseded by BS EN 60598-2-8:2013
  • BS EN 60598-2-11:2005 Luminaires. Particular requirements. Aquarium luminaires
    Superseded by BS EN 60598-2-11:2013
  • BS EN 60598-2-12:2006 Luminaires. Particular requirements. Mains socket-outlet mounted nightlights
    Superseded by BS EN 60598-2-12:2013
  • BS EN 61000-3-3:2008 Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
    Superseded by BS EN 61000-3-3:2013
  • BS EN 61034-2:2005 Measurement of smoke density of cables burning under defined conditions. Test procedure and requirements
    Superseded by BS EN 61034-2:2005+A1:2013
  • BS EN 61212-3-1:2006 Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Round laminated rolled tubes
    Superseded by BS EN 61212-3-1:2013
  • BS EN 61212-3-2:2006 Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Round laminated moulded tubes
    Superseded by BS EN 61212-3-2:2013
  • BS EN 61377-1:2006 Railway applications. Rolling stock. Combined testing of inverter-fed alternating current motors and their control system
    Superseded by BS EN 61377:2016
  • BS EN 61377-2:2002 Railway applications. Rolling stock. Combined testing. Chopper-fed direct current traction motors and their control
    Superseded by BS EN 61377:2016
  • BS EN 61377-3:2002 Railway applications. Rolling stock. Combined testing of alternating current motors, fed by an indirect convertor, and their control system
    Superseded by BS EN 61377:2016
  • BS EN 61427:2005 Secondary cells and batteries for photovoltaic energy systems (PVES). General requirements and methods of test
    Superseded by BS EN 61427-1:2013 and BS EN 61427-2:2015
  • BS EN 61996-1:2008 Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR). Voyage data recorder (VDR). Performance requirements, methods of testing and required test results
    Superseded by BS EN 61996-1:2013
  • BS EN 62446:2009 Grid connected photovoltaic systems. Minimum requirements for system documentation, commissioning tests and inspection
    Superseded by BS EN 62446-1:2016
  • BS ISO 11944:1993 Round general use light gauge metal containers. Nominal diameters for cylindrical and tapered cans up to 10 000 ml capacity
    This standard is withdrawn as the corresponding ISO publication has also been withdrawn
  • BS ISO 21067-2:2015 Packaging. Vocabulary. Packaging and the environment terms
    This standard is withdrawn without a replacement
  • DD CLC/TS 61643-22:2006 Low-voltage surge protective devices. Surge protective devices connected to telecommunications and signalling networks. Selection and application principles
    Superseded by PD CLC/TS 61643-22:2016
  • BS IEC 62601:2011 Industrial communication networks. Fieldbus specifications. WIA-PA communication network and communication profile
    Superseded by BS EN 62601:2016
  • DD IEC/TS 61400-13:2001 Wind turbine generator systems. Measurement of mechanical loads
    Superseded by BS EN 61400-13:2016
  • BS M 33:1970 Specification for dimensions of elastomeric toroidal sealing rings (inch series) to Class 1 tolerances for aircraft
    Superseded by BS M 48:1975
  • BS QC 410100:1990 (IEC 60393-2:1989) Harmonized system of quality assessment for electronic components. Potentiometers for use in electronic equipment. Sectional specification: lead screw actuated and rotary preset potentiometers
    Superseded by BS EN 60393-2:2016
  • BS QC 410300:1992 (IEC 60393-5:1992) Harmonized system of quality assessment for electronic components. Potentiometers for use in electronic equipment. Sectional specification for single-turn rotary low-power wirewound and non-wirewound potentiometers
    Superseded by BS EN 60393-5:2016
ISO 15765-2:2016

Abstract Preview

ISO 15765-2:2016 specifies a transport protocol and network layer services tailored to meet the requirements of CAN‑based vehicle network systems on controller area networks as specified in ISO 11898‑1. It has been defined in accordance with the diagnostic services established in ISO 14229‑1 and ISO 15031‑5 but is not limited to use with them and is also compatible with most other communication needs for in‑vehicle networks.

ISO 11898‑1 specifies variable length CAN frames with a maximum payload size dependent on the protocol device used. A CLASSICAL CAN protocol device can transmit/receive frames with payload sizes ranging from 0 bytes to 8 bytes per frame. A CAN FD (flexible data rate) protocol device can transmit/receive frames with payload sizes from 0 bytes to 64 bytes. A CAN FD protocol device is also capable of transmitting/receiving CLASSICAL CAN frames.

The diagnostic communication over controller area network (DoCAN) protocol supports the standardized service primitive interface as specified in ISO 14229‑2 (UDS).

ISO 15765-2:2016 provides the transport protocol and network layer services to support different application-layer implementations such as

- enhanced vehicle diagnostics (emissions-related system diagnostics beyond legislated functionality, non-emissions-related system diagnostics),

- emissions-related on-board diagnostics (OBD) as specified in ISO 15031,

- world-wide harmonized on-board diagnostics (WWH-OBD) as specified in ISO 27145, and

- end of life activation on on-board pyrotechnic devices (ISO 26021).

The transport protocol specifies an unconfirmed communication.

Iso 15765 2 2016 torrent

NOTE This part of ISO 15765 does not determine whether CLASSICAL CAN, CAN FD or both are recommended or required to be implemented by other standards referencing this part of ISO 15765.


General information

  • Publication date : 2016-04
  • Number of pages : 51
  • :
  • ICS :

Buy this standard

  • CHF178

Life cycle

A standard is reviewed every 5 years

  • 10
    Proposal
  • 30
  • 40
  • 50
  • 60.60
    Publication
  • 90

Revisions / Corrigenda

  • Previously
    ISO 15765-2:2011
  • Now
    ISO 15765-2:2016

Iso 15765 Can

+41 22 749 08 88

Iso 15765 2 2016 Teljes Film

Opening hours:
Monday to Friday - 09:00-12:00, 14:00-17:00 (UTC+1)

Keep up to date with ISO

Iso 15765 2 2016 Pdf Download

Sign up to our newsletter for the latest news, views and product information.