How To Reset Nikon D5500 To Factory Settings

It is the Reset Custom setting option. You have to click on it to go back to the default settings mode on your Nikon D5600 camera. Step Three: To Avoid File Number Sequence Option Going Back To Default. When you are using custom reset option to go back to the default settings on your Nikon D5600 camera, you will have to encounter a problem. They give you a sneak peek at the settings I use for a variety of situations. I show you every setting to adjust, with step-by-step instructions that anyone can follow. If you have questions about your Nikon D5500, you can chat with me on Facebook or on Twitter. I do my best to get back to everyone as fast as I can.

How do you restore the nikon d5100 back to factory settings?

You can reset the 'shooting menu' options… And reset the 'custom settings'… I reckon that this would get you back to as good as factory settings… It's not something i'd want to do with my camera… I spend a lot of time 'calibrating' a camera to the way I like it.

Try this link

most settings can be reset to their factory defaults by holding the 'Menu' and 'Info' buttons down concurrently for 2 or more seconds.

Page 58 of the manual contains more detailed onfo on this.

Nikon's site says the same thing… Https://

The only other info I could find is:
Reset all Shooting Menu options: Open shooting Menu, choose Reset Shooting Menu, and press OK.
Reset all Custom Setting Menu options: Choose the Reset Custom settings Option at the top of the custom setting menu.
Restore critical picture taking settings without affecting all options on the Custom setting menu: Press and hold the Menu button and the Info Edit button simultaneously for more than 2 seconds.

The internal built-in battery keeps the date and time intact. Until it loses it's charge, they will not be reset.

This did not wrk for me. Any other ideas?

If you have been using the full auto mode (aka the little green square) on your camera for very long, chances are that it has frustrated you at some point because it won’t let you do something that seems like a no-brainer. Have you ever tried to turn the off the flash when using full auto only to have it pop right back up when you press the shutter again? Thank the full auto mode for that.

If you are trying to exercise a little more creative control over your camera’s settings, then it is time to move to the P, or Program, mode.

Program Mode vs. Full Auto Mode

As we learned in a prior article, full auto mode locks everything down so that the camera makes all of the decisions, including exposure, flash and focus points, among others. In Program mode, the camera still makes the overall decision of the base exposure based on evaluation of what it meters to balance the light and dark scenes and arrive at 18% gray for the scene.

However, Program mode also gives you control to tweak the exposure by using exposure compensation, flash settings and metering patterns. Additionally, Program mode also gives you control over focus point selections, autofocus modes and other camera settings.

As noted, the basics of exposure are still handled by the camera; however, even those basics can be adjusted to favor one element over the other. For example, in Program mode, you can adjust the ISO setting manually to set an auto-ISO threshold on many cameras. Generally, full auto mode is limited to an auto-ISO setting.

Many cameras also allow you to shift the aperture and shutter speed ranges to a certain threshold in Program mode. This does not go as far as a full-on Aperture Priority or Shutter Priority mode and is generally a limited range when available. Additionally, this is not the same as using exposure compensation. The actual exposure doesn’t change because when you shift the aperture up, the camera shifts the shutter speed down to match the same auto-exposure.

Of course, Program mode also gives you full control over your flash settings. You can turn the flash completely off or select a variety of modes while still relying on the camera to automatically adjust exposure by taking the flash output in account.

Exposure Compensation

Exposure compensation is probably the most powerful feature that Program mode gives you. There is an entire article covering how to use exposure compensation, so I will refrain from re-hashing that. However, the takeaway with exposure compensation is that it allows you to increase or decrease the exposure of a scene. You are essentially telling your camera, “I see what you’re doing there with your ‘balanced’ exposure, but I want it to be brighter (or darker),” as the case may be.


Metering Modes

On most cameras that offer a Program mode, there are generally three or four main metering modes.

  • Evaluative metering
  • Center-weighted average metering
  • Partial spot metering
  • Spot metering

The general function of each mode is that they evaluate the scene from the widest area (evaluative metering) to the smallest area (spot metering).

Evaluative metering would be used in a scene where you wanted a balanced exposure for the entire scene (e.g., a mid-day landscape or vacation snapshots). Spot metering allows you to designate a small spot, usually in the center of the frame, from which the camera meters the exposure information. Spot metering is helpful in portraits or other scenes where the subject has significantly different lighting than other parts of the scene.


Changing up metering modes gives you a great deal of control over the camera’s exposure evaluation without actually taking manual control of the aperture, shutter or ISO settings.

Where I Use Program Mode

While I don’t use it very often, I will sometimes use Program mode when I am out with my family – especially if it is a camera or lens with which I am not familiar. I will use a combination of Program mode and exposure compensation for trips to Disney World or other amusement parks. I particularly like Program mode when using an advancing point and shoot camera that has an exposure compensation dial on the camera’s exterior.

I generally favor Aperture-priority mode for snapshots with a DSLR because of a consistent and intentional depth-of-field; however, if I am in and out of various lighting situations, I will use Program mode in combination with an auto-ISO setting to prevent serious overexposure or underexposure, the latter of which induces terrible camera-shake blur. Again, think Disney World and other amusement parks where you are moving inside to outside throughout the day.

How To Reset Nikon D5500 To Factory Settings Download

Wrapping Up Program Mode

How To Reset Nikon D5500 To Factory Settings 10

These are some of the major functions and benefits to using P, or Program, mode on cameras that offer the setting. It is a powerful mode even though it still allows the camera to determine the overall exposure. Understanding the control that Program mode offers allows you to create a wide range of exposures and effects in a single scene.