Digicertutil Exe

Is my procedure to sign an exe file correct? Did some reading on the whole Windows server PKI infra and CertTool. I have the.cer file with private key. But not able to locate it somehow. But was able to sign my exe with this certificate using DigiCertUtil.exe. Don't forget to include the private key in the root directory of the DigiCertUtil.exe executable. Easiest is to just copy it to the certificate folder. – Jonas Apr 23 at 3:54 show 1 more comment. The Microsoft Pvk2Pfx command line utility seems to have the functionality you need. On your Windows workstation, download and save the DigiCert® Certificate Utility for Windows executable (DigiCertUtil.exe). Run the DigiCert Certificate Utility. Double-click DigiCertUtil. In the DigiCert Certificate Utility for Windows©, click SSL (gold lock), and then, click Create CSR. On your Windows Server, download and save the DigiCert Certificate Utility for Windows executable (DigiCertUtil.exe). Run the DigiCert Certificate Utility for Windows (double-click DigiCertUtil). In the DigiCert Certificate Utility for Windows©, click SSL (gold lock), and then click Create CSR. DigiCert Certificate Utility for Windows 2.3.7 can be downloaded from our software library for free. This free tool was originally produced by DigiCert, Inc. Commonly, this program's installer has the following filename: DigiCertAgent.exe.

  1. Digicertutil.exe
  2. Digicert Global Root Ca
  3. Digicertutil Exe Download
  4. Digicertutil.exe
  5. Digicertutil.exe Command Line
  6. Descargar Digicertutil.exe

Using the DigiCert Certificate Utility to Sign Your Code

Microsoft is changing the process for signing your kernel-mode driver packages
Starting in 2021, Microsoft will be the sole provider of production kernel-mode code signatures. You will need to start following Microsoft’s updated instructions to sign any new kernel-mode driver packages going forward. To lean more, see our knowledge base article—Microsoft sunsetting support for cross-signed root certificates with kernel-mode signing capabilities.

If you have not yet ordered your Code Signing Certificate, visit Code Signing Certificates.

After installing your DigiCert Code Signing Certificate on your Windows server or workstation, use the DigiCert® Certificate Utility for Windows to:

  • Sign your code – How to Sign Your Code with the DigiCert Utility.

  • Check your file's code signing signature – How to Check Your File's Signature

How to Sign Your Code with the DigiCert Utility

  1. If you are using an EV Code Signing Certificate, plug in your token/device now.

  2. On your Windows server or workstation, download and save the DigiCert® Certificate Utility for Windows executable (DigiCertUtil.exe).

  3. Run the DigiCert® Certificate Utility for Windows.

    Double-click DigiCertUtil.

  4. In the DigiCert Certificate Utility for Windows©, click Code Signing (blue and silver shield), select the Code Signing Certificate that you want to use to sign your code, and then, click Sign Files.

    If you do not see your EV Code Signing Certificate, plug in your token now.

  5. In the Code Signing window, click Add Files, then browse for and select the file that you want to sign.

  6. Next, check Add a timestamp to the signature if you want to time stamp your signature.

    • To add a timestamp, you must be connected to the Internet.

    • Adding a timestamp allows your signature to remain valid after the Code Signing Certificate has expired, as long has the code remains unchanged.

  7. (Optional) Check Kernel Mode Signing if you are signing a kernel mode driver.

    Depending on the format that you selected for your certificate, you may not see this option.

  8. Finally, click Sign.

  9. When you receive the “All the files have been successfully signed” message, click OK.

  10. Congratulations, you should now have a freshly signed piece of code, ready to use!
Digicert util download

How to Check Your File's Signature

  1. In the DigiCert Certificate Utility for Windows©, click Code Signing (blue and silver shield).

  2. Next, click Check Signature to select and open the file whose signature you want to check.

  3. In the Code Signed Signature Check window, you should see a green checkmark for “The file is signed and the signature was verified”.

    If you checked Add a timestamp to the signature, you should also see a green checkmark for “The signature was time stamped by DigiCert Inc on 'Date and Time'”.

    If you checked Kernel Mode Signing, the page will contain Kernel Mode Cross Certificate information.

Get code signing certificates for just $474/year

Buy Now
Create CSR & Install SSL Certificate with DigiCert Utility On Windows Server 2016

Digicertutil.exe

2020-11-24T16:19:44+01:002020-11-24T16:19:44+01:00Windowshttps://thuvien.info/en/news/office-application/create-csr-install-ssl-certificate-with-digicert-utility-on-windows-server-2016-10.htmlhttps://thuvien.info/uploads/news/2020_11/utility-csr-creation-1.png
Libraryhttps://thuvien.info/uploads/logo.png

Các hướng dẫn này giải thích cách sử dụng Tiện ích Chứng chỉ DigiCert ® cho Windows và IIS 10 để tạo CSR, cài đặt chứng chỉ SSL và định cấu hình Windows Server 2016 của bạn để sử dụng chứng chỉ.Sử dụng Tiện ích Chứng chỉ DigiCert ® dành cho Windows để tạo CSR và cài đặt chứng chỉ SSLcủa bạn trên Windows Server 2016

® Certificate Utility for Windows

For a simpler way to create your CSRs (Certificate Signing Requests) and install and manage your SSL certificates, we recommend that you use the DigiCert Certificate Utility.

Use the instructions on this page to create your certificate signing request (CSR) and to install and configure your SSL certificate.

  1. To create your certificate signing request (CSR).

  2. To install your SSL certificate.

1. Windows Server 2016: Creating Your CSR with the DigiCert Utility

The DigiCert® Certificate Utility for Windows streamlines the CSR creation process enabling you to generate the CSR with just one click.

How to Create Your CSR with the DigiCert Utility

  1. On your Windows Server 2016, download and save the DigiCert® Certificate Utility for Windows executable (DigiCertUtil.exe).

  2. Run the DigiCert® Certificate Utility for Windows.

    Double-click DigiCertUtil.

  3. In the DigiCert Certificate Utility for Windows©, click SSL (gold lock), and then, click Create CSR.

  4. On the Create CSR page, enter the following information:

    Certificate Type:Select SSL.
    Common Name:Enter the fully qualified domain name (e.g., www.example.com).
    You may also enter the IP address.
    Subject Alternative Names:If you are requesting a Multi-Domain (SAN) Certificate, enter any SANs that you want to include.
    (e.g., www.example.com, www.example2.com, and www.example3.net)
    Organization:Enter your company's legally registered name (e.g., YourCompany, Inc.).
    Department:(Optional) Enter the department within your organization that you want to appear on the SSL certificate.
    City:Enter the city where your company is legally located.
    State:In the drop-down list, select the state where your company is legally located.
    If your company is located outside the USA, you can enter the applicable name in the box.
    Country:In the drop-down list, select the country where your company is legally located.
    Key Size:In the drop-down list, select 2048.
    Provider:In the drop-down list, select Microsoft RSA SChannel Cryptographic Provider,
    unless you have a specific cryptographic provider.
  5. Click Generate:

  6. On DigiCert Certificate Utility for Windows© - Create CSR page, do one of the following, and then, click Close:

    Click Copy CSRCopies the certificate contents to the clipboard.
    If you use this option, we recommend that you paste the CSR into a tool such as Notepad.
    If you forget and copy some other item, you still have access to the CSR, and don't have to go back and recreate it.
    Click Save to FileSaves the CSR as a .txt file to the Windows Server 2016.
    We recommend that you use this option.
  7. Use a text editor (such as Notepad) to open the file. Then, copy the text, including the -----BEGIN NEW CERTIFICATE REQUEST----- and -----END NEW CERTIFICATE REQUEST----- tags, and paste it into the DigiCert order form.

  8. After you receive your SSL certificate from DigiCert, you can use the DigiCert Certificate Utility to install it.

2. Windows Server 2016: Using the DigiCert Utility and IIS 10 to Install Your SSL Certificate

Digicert Global Root Ca

Digicertutil ExeExe

After DigiCert validates your order and has issues your SSL certificate, you can use the DigiCert® Certificate Utility for Windows, to install the certificate file to your Windows Server 2016. Then you can use IIS 10 to configure the server to use it.

To install your SSL certificate on your Windows Server 2016, complete the steps below.

  1. Import your SSL certificate to your Windows Server 2016 using the DigiCert® Certificate Utility for Windows.

  2. Configure your Windows Server 2016 to use the SSL certificate using IIS 10.

i. How to Import Your SSL Certificate Using the DigiCert Certificate Utility

After DigiCert issues your SSL certificate, you can use the DigiCert Certificate Utility, to install the certificate file to your Windows Server 2016.

Microsoft Certificate Store Note:

When you use the DigiCert® Certificate Utility for Windows to import/install your SSL certificates on your Windows Server 2016, it will place the certificates in the Personal store instead of the Web Hosting store. If you have less then 20 to 30 certificates, this will not be a problem.

However, if you are managing 30 or more certificates you will need to move your certificates to the Web Hosting store, which was designed to scale to a greater number of certificates.

Importing an SSL Certificate to Your Windows Server 2016

Digicertutil Exe Download

  1. On the Windows Server 2016, where you created the CSR, open the ZIP file containing your SSL certificate and save the contents of the file (e.g., your_domain_com.cer) to the folder where you saved the DigiCert Certificate Utility executable (DigiCertUtil.exe).

  2. Run the DigiCert Certificate Utility.

    Double-click DigiCertUtil.

  3. In the DigiCert Certificate Utility for Windows©, click SSL (gold lock) and then, click Import.

  4. In the Certificate Import wizard, click Browse to browse to the .cer certificate file (e.g., your_domain_com.cer) that DigiCert sent you, select the file, click Open, and then, click Next.

  5. In the Enter a new friendly name or you can accept the default box, type a friendly name for the certificate.

    Note: The friendly name is not part of the certificate; instead, it is used to identify the certificate.

    We recommend that you add DigiCert and the expiration date to the end of your friendly name, for example: yoursite-digicert-(expiration date). This information helps identify the issuer and expiration date for each certificate. It also helps distinguish multiple certificates with the same domain name.

  6. To import the SSL certificate to your server, click Finish.

  7. You should receive a message that the certificate was successfully imported. You should now see your SSL certificate in the DigiCert Certificate Utility for Windows©

  8. (Optional) Repeat the process as needed for each additional SSL certificate.

  9. Now that you've successfully installed your SSL certificate, you need to assign the certificate to the appropriate site.

    Note: If you are managing 30 or more certificates you will need to move your certificates to the Web Hosting store, which was designed to scale to a greater number of certificates.

ii. How to Configure the Server to Use Your SSL Certificate Using IIS 10

After importing your SSL certificate to your Windows Server 2016, you must configure IIS to use the newly imported certificate to secure your website.

  • (Single Certificate) How to configure the server to use your SSL certificate
  • (Multiple Certificates) How to configure the server to use your SSL certificates using SNI

(Single Certificate) How to configure the server to use your SSL certificate

  1. On the Windows Server 2016 where you imported your SSL certificate with the DigiCert Certificate Utility, open Internet Information Services (IIS) Manager.

    In the Windows start menu, type Internet Information Services (IIS) Manager and open it.

  2. In Internet Information Services (IIS) Manager, in the Connections menu tree (left pane), expand the name of the server on which the certificate was installed. Then expand Sites and click the site you want to use the SSL certificate to secure.

  3. On the website Home page, in the Actions menu (right pane), under Edit Site, click the Bindings… link.

  4. In the Site Bindings window, click Add.

  5. In the Add Site Bindings window, do the following and then click OK:

    Type:In the drop-down list, select https.
    IP address:In the drop-down list, select the IP address of the site or select All Unassigned.
    Port:Type port 443. The port over which traffic is secured by SSL is port 443.
    SSL certificate:In the drop-down list, select your new SSL certificate (e.g., yourdomain.com).
  6. Your SSL certificate is now installed, and the website configured to accept secure connections.


(Multiple Certificates) How to install your SSL certificates and configure the server to use them using SNI

If you have not imported all your SSL certificates.

This instruction explains how to assign multiple SSL certificates using SNI. The process is split into two parts as follows:

Digicertutil Exe
  • Assign the First SSL Certificate

  • Assign All Additional Certificates

Assign the First SSL Certificate

Do this first set of instructions only once, for the first SSL certificate.

  1. On the Windows Server 2016 where you imported your SSL certificates with the DigiCert Certificate Utility, open Internet Information Services (IIS) Manager.

    In the Windows start menu, type Internet Information Services (IIS) Manager and open it.

  2. In Internet Information Services (IIS) Manager, in the Connections menu tree (left pane), expand the name of the server on which the certificate was installed. Then expand Sites and click the site you want to use the SSL certificate to secure.

  3. On the website Home page, in the Actions menu (right pane), under Edit Site, click the Bindings… link.

  4. In the Site Bindings window, click Add.

  5. In the Add Site Bindings window, do the following and then click OK:

    Type:In the drop-down list, select https.
    IP address:In the drop-down list, select the IP address of the site or select All Unassigned.
    Port:Type port 443. The port over which traffic is secure by SSL is port 443.
    SSL certificate:In the drop-down list, select your new SSL certificate (e.g., yourdomain.com).
  6. Your first SSL certificate is now assigned, and the website configured to accept secure connections.

Digicertutil.exe

Assign All Additional SSL Certificates

To assign each additional SSL certificate, repeat the steps below, as needed.

  1. In Internet Information Services (IIS) Manager, in the Connections menu tree (left pane), expand the name of the server on which the certificate was installed. Then expand Sites and click the site you want to use the SSL certificate to secure.

  2. On the website Home page, in the Actions menu (right pane), under Edit Site, click the Bindings… link.

  3. In the Site Bindings window, click Add.

  4. In the Add Site Bindings window, do the following and then click OK:

    Type:In the drop-down list, select https.
    IP address:In the drop-down list, select the IP address of the site or select All Unassigned.
    Port:Type port 443. The port over which traffic is secure by SSL is port 443.
    Host name:Type the host name that you want to secure.
    Require ServerAfter you enter the host name, check this box.
    Name Indication:This is required for all additional certificates/sites, after you've installed the first certificate and secured the primary site.
    SSL certificate:In the drop-down list, select an additional SSL certificate (e.g., yourdomain2.com).
  5. You have successfully assigned another SSL certificate and configured the website to accept secure connections.

Digicertutil.exe Command Line

Older articles

Descargar Digicertutil.exe

  • How to install phpMyAdmin on IIS on Windows 10 or Windows Server 2016?

    (24/11/2020)